Eurocom L390T Uno User Manual
Page 138
Intel Video Driver Controls
B - 10 Display Modes
B
To Enable Intel(R) Dual Display Clone
1.
Attach your external display to the external monitor port or HDMI-Out port, and
turn it on.
2.
Go to the Intel(R) GMA Driver for mobile control panel (see
) and click Display Devices.
3.
Click to choose Intel(R) Dual Display Clone (Operating Mode).
4.
Choose which device is to be the Primary Device/Secondary Device from the
Display Selection menu.
5.
Click Apply, and OK to confirm the settings change.
6.
Click Display Settings to adjust the settings for the attached devices.
Figure B - 7
Display Devices &
Settings