Eurocom Racer 3W - Manual (Page 11)

5
Engl
ish
Model Differences
This notebook series includes five different model types that mainly differ as indicated in the table below.
Table 1 - Model Differences
RAID Setup
You may use your hard disks in combination with Striping (RAID 0), Mirroring (RAID 1) or Recovery for either fault
tolerance or performance.
Table 2 - RAID Description
Feature Model A Model B Model C Model D Model E
Video Adapters Supported See Specifications on page 36 for a full list of video adapters supported by each model.
Display Type 15.6" (39.62cm) FHD 17.3" (43.94cm) FHD
Illuminated Keyboard Yes No Yes
Illuminated Touchpad No Yes No No Yes
AC/DC Adapter 180W 120W 230W
RAID Level Description
RAID 0
(at lease two hard disks/
SSDs needed)
Identical drives reading and writing data in parallel to increase performance. RAID 0 implements a striped
disk array and the data is broken into blocks and each block is written to a separate disk drive.
RAID 1
(at lease two hard disks/
SSDs needed)
Identical drives in a mirrored configuration used to protect data. Should a drive that is part of a mirrored
array fail, the mirrored drive (which contains identical data) will handle all the data. When a new replace-
ment drive is installed, data to the new drive is rebuilt from the mirrored drive to restore fault tolerance.
Recovery
(at lease two hard disks/
SSDs needed)
Two Identical drives copying data between a master and a recovery disk. This provides more control over how
data is copied between the master and recovery drives, fast volume updates and the ability to view the data in
Windows Explorer.