Eurocom Panther 5 - Manual (Page 15)

10
English
Keyboard LED
Press Fn plus the key to toggle the keyboard LED on/
off. The keyboard LED may be configured using the Fn +
key combination outlined in the table below. In addition
press
Fn plus the key to launch the keyboard backlight
application to configure the settings.
Table 6 - Keyboard LEDs
Keyboard Backlight Application
The Keyboard Backlight application can be accessed by
pressing the Fn plus
key. Click the Help button in
the application to display the configuration keys.
• Click the Custom button to display the three sections
of the keyboard which may be configured.
• Click a section of the keyboard and the color buttons will
be displayed.
• Click a color swatch to apply the color to the selected sec-
tion when not overidden by any effect applied.
• Click on any of the effect buttons to apply random colors,
wave or flashing effects etc.
Figure 6 - Keyboard Backlight Application
Effects Buttons & Help
Table 7 - LED Effects Buttons
Keyboard LED Function key Combinations
Fn + Launch the Keyboard Backlight Application
Fn + Toggle the Keyboard Backlight On/Off
Fn +
Keyboard LED Illumination Decrease
Fn +
Keyboard LED Illumination Increase
LED Effects Buttons
Random Color Up/Down Wave
Dancing Effect Breathing (All Colors)
Tempo Beat
Cycle (Colors as Selected
in RGB)
Flashing
Custom - Display & Con-
figure Keyboard Sections
& Colors
Help Button
Keyboard Sections
Effects Buttons
Color Swatches