English, Troubleshooting - 33 concise user’s guide – Eurocom D40EV IMPRESSA User Manual
Page 39
Troubleshooting - 33
Concise User’s Guide
English
Unwelcome numbers appear
when typing.
For Model A only - If the LED
is lit, then Number Lock is turned ON. Press and release the
Fn + NumLk key combination (see
).
The Wireless LAN or Bluetooth
module cannot be detected/
configured.
The ON/OFF switch
has not been switched ON. Make sure you have set the ON/OFF
switch to ON in order to enable the module.
The ON/OFF switch
has been switched ON, but you have both the Wireless LAN and
Bluetooth modules in your computer. Use the Fn + F12 key combination to toggle power to the
modules. DO NOT enable power and attempt to use both modules at the same time as this may
cause a conflict.
The driver(s) for the module(s) has (have) not been installed. Make sure you have installed the
driver for the appropriate module.
The system sees the card reader
as a disk drive, and automatically
defines it as drive “C:”.
If you are installing an operating system (e.g. Windows XP), make sure to set the USB Host
Controller option in the BIOS to “Disabled”. This will disable all the USB ports. This will also
prevent the system from seeing the card reader as a disk drive. Don’t forget to enable the USB
ports after installing the operating system.
Problem
Possible Cause - Solution