Eurocom Electra 2 - Manual (Page 143)

Upgrading The Computer
Replacing the Component Bay Cover - Model B 6 - 7
6
Replacing the Component Bay Cover - Model B
1. Reinsert the component bay cover by placing it on the bottom case assembly, and
aligning the pins at the bottom of the cover with the slots in the case to ensure a
proper fit.
2. Press down on the cover to make sure it fits tightly.
3. Replace screws & ( Figure 6 - 2 on page 6 - 4 ) and battery (see page 6 - 3 ).
Figure 6 - 5
Replacing the
Component Bay
Cover
(Model B)
1 2