Eurocom Electra 2 - Manual (Page 112)

Drivers & Utilities
4 - 2 Driver Installation
4
Driver Installation
1. Insert the Device Drivers & Utilities + User’s Manual disc into the computer’s DVD drive.
2. Click the message “Tap to choose what happens with this disc.”
3. Click Run autorun.exe.
4. Click Install Drivers (button), or Option Drivers (button) to access the Optional driver menu.
Figure 4 - 1 - Drivers Installer Screen 1
5. Check the driver installation order from Table 4 - 1, on page 4 - 4 (the drivers must be installed in this order)
which is the same as that listed in the Drivers Installer menu below.
6. Click to select the driver you wish to install, (you should note down the drivers as you install them).