Eurocom Electra 2 - Manual (Page 140)

Upgrading The Computer
6 - 4 Removing the Component Bay Cover - Model A
6
Removing the Component Bay Cover - Model A
1. Turn off the computer, and turn it over and remove the battery (see page 6 - 3 ).
2. Remove screws & from the bottom of the computer.
3. Slide the component bay cover until the cover and case indicators are aligned.
4. Lift the bottom cover off the computer case.
Figure 6 - 2
Removing the
Component Bay
Cover
(Model A)
1 2
3
4
1 2
3
4
3