ENMET OMNI-4000 - Manual (Page 12)

ENMET Corporation OMNI-4000 S/N 6705 and above
6
1.6 Sensor Readings
Instantaneous Readings
The gas content measured by each of the enabled sensors can be seen on the alphanumeric display. This is divided into
four independent quadrants, each corresponding to a sensor or "Channel." See Figure 1-5.
It is therefore possible to see a maximum of four readings at the same time. The amount of available useful data is greater
than the display capacity of each quadrant, so the measurements are displayed alternately as follows:
• Reading: Sensor gas
• Reading: Unit of measurement
Thus the operator alternately sees displayed:
• The quantity and chemical description of the gases that can be detected
• The quantity and unit of measurement of the gases that can be detected
Figure 1-5: Channel Information Quadrants
1
2
4 3