Echelon ISI - Manual (Page 119)

117 ISI Programmer’s Guide
IsiEvent Value Note
isiCancelled 5 Connection has been cancelled by a timeout,
user, or network action. The parameter is
always set to ISI_NO_ASSEMBLY.
isiDeleted 6 Connection has been deleted. The parameter
identifies the assembly.
isiWarm 7 ISI engine has warmed up—i.e., some
reasonable, but random, time has passed since
the last reset. From this moment on, the
application may call the
IsiInitiateAutoEnrollment() function.
isiPendingHost 8 Connection host related to the assembly given
with the numerical parameter entered the
pending state. The device has issued the CSMO
but not yet received a CSME.
isiApprovedHost 9 Connection host related to the assembly given
with the numerical parameter changed from the
pending state to the approved state. Occurs at
the receipt of the first CSME.
isiAborted 10 Device stopped the domain or device
acquisition. The parameter is a member of the
IsiAbortReason enumeration and indicates the
reason for the abort.
isiRetry 11 The device is retrying device acquisition. The
parameter is set to the remaining number of
retries.
isiWink 12 Device should perform its wink function. The
specific function is application-dependent, but
should provide some visible feedback to the
user. For example, the application may blink
an LED on the device.
isiRegistered 13 Indicates either acquisition start or successful
acquisition completion process on either an ISI-
DA or ISI-DAS device. The parameter indicates
either a successful start (parameter = 0) or
completion (parameter = 0xFF).
IsiFlags Enumeration
Specifies option flags for the IsiStart() functions used to start the ISI engine.
These flags may be combined.
IsiFlags Value Note
isiFlagNone 0x00 Typical default value with no flags
specified.