Dynavector DV 507 MKII tonearm - Manual (Page 9)

6-8. Arm lift (cueing device)
The silicone oil dampened tonearm lift is provided.
(1) To lower the stylus onto the record
Position the tonearm so that the sty-
lus is over the record groove and
lower the arm lift lever carefully.
(2) To lift the stylus from the record
raise the arm lift lever carefully.
NOTE: When lowering the stylus onto the record, the cueing point may drift a little
toward the outer groove of the record. This is because of anti-skating force, it is
not defect with the arm lift.
u
All adjustments and setting are now completed. DV507MKII is designed to be
maintenance free and there are no parts which will wear out under usual operating
conditions.
Please contact your local dealer or Dynavector distributor in your country in the
event of any of the problems listed below.
(1) The arm had been dropped or subjected to excessive shock.
(2) Kept for a long time in a dusty condition.
7. Appendix
We hope that with the aid of the instruction manual you been able to achieve cor-
rect adjustment and setting. Please note the following to keep the arm at the best
condition.
(1) Do not attempt to disassemble the arm.
(2) Do not apply oil or other lubricant to any parts of the arm.
(3) Keep the packaging for sending the arm for repair.