Dynavector DV 507 MKII tonearm User Manual
Page 7
E.g. When the total weight is 20g and you use
sub weight A, you should adjust the front end
of the main weight to line up with the 20 above
the ‘A’ printed on the arm - see picture.
NOTE: This adjustment is not super critical if
the turntable and arm are level (as they should
be).
6-5. Vertical Tracking Force (VTF) adjustment
Place the correct sub-weight onto the sub
arm. Please note the screws of the sub-weight
should face toward you.
(1) The VTF dial should be adjusted to “0g” point.
(2) Balance the sub arm level by sliding the
sub-weight forward and backward.
(3) You can then adjust the VTF according to the
cartridge manufacturer’s specification using the VTF
dial.
(4) Adjustment range of the VTF is between 0.5 g
and 3.0 g in 0.2g steps.
You will find whilst doing this that the mounting
of the counterweight stub is flexible, this is
deliberate and a feature that is designed to
reduce resonances in the arm