Dynavector DV 507 tonearm - Manual

Dynavector DV507 Tone arm Instruction Manual
INDEX
Here appears the new bi-axis tone arm
Dynavector DV507 designed on the same
theoretical base of DV505 and DV501
which are recognized and appreciate
highly by their outstanding performance
and thus given the Design and Engineering
Award at C.E.S. Chicago 1977 and 1982.
DV507 has more theoretical improvement
as well as the more conventional in the
actual use.
1. Foreword
2. Parts illustration
3. Installation to turntable
4. Output line connection
5. Cartridge installation and
adjustments
6. Specifications
1. Foreword
Thank you for choosing Dynavector products. DV507 is a specially designed tone arm which can
reproduce the signal on disc without influence caused by disc warp. In order to perform its unique
specifications Including bi-axis inertia separation to vertical and lateral directions, the DV507 has a
more complicated structure compared to conventional tone arms.
However, it is quick and easy to set up, provided that you should read this instruction manual carefully
first.
2. Parts illustration