Dynavector SuperStereo Adapter Adp3 - Manual (Page 9)

Safety Instructions
n Model
Adp-3 analogue/digital SuperStereo processor with 2ch
power amplifier
n Impedance
LINE IN 50K ohms
SPEAKER 300 ohms
n Input Voltages
Overload warning indicator level
LINE IN 1.0 volt
SPEAKERS INPUT SENSITIVITY
HIGH 10.0 volts (approx.)
(= front speaker output: 4 ohms 25 watts)
LOW 20.0 volts (approx.)
(= front speaker output: 4 ohms 100 watts)
n Output Voltage
ADAPTER LINE OUT 4.0 volts
( load impedance >10 K ohms)
n Speaker Impedance
4 - 8 ohms
n Amplifier Output
24W+24W 4 ohms load
20W+20W 8 ohms load
(500 Hz consecutive actual value)
n Mode
3 SuperStereo modes selectable
n Reverberation
SuperStereo analogue/digital feedback gain
n Polarity
Polarity of sub-speaker is reversible against front speaker
n Power supply requirement
AC 100 / 115 / 220-240 volts 50/60 Hz,
according to market
n Power consumption
90 VA
n Dimensions
430W x 70H x 282D mm
n Weight
6.2kg(approx.)
n Accessories
- Sub-speakers cable (1m x 2, 7m x 2)
- AC power cord
- Warranty card
- Operation manual
n Safety Compliance
complies with EN 60065
n Country of Origin
Made in Japan
z In the interests of product development, Dynavector
reserves the right to change specifications at any time.
Taking care of your ADP-3 Adapter
1. Ventilation -Be sure to locate the Adp-3 in areas where there is reasonably good air circulation..
2. Water and Moisture - The Adp-3 should be kept dry at all times. To prevent fire or shock hazard, do not expose
the product to any form of moisture.
3. Heat - The Adp-3 should be situated away from heat sources such as direct sunlight, radiators, fires, stoves or
any other appliances which produce heat.
4. Power Sources - The Adp-3 should only be operated on the voltage of the area in which it is supplied.
5. Cleaning - A regular dusting with a soft, non-abrasive cloth will generally keep the finish of the faceplate and
chassis looking like new. Do not use liquid or aerosol cleaners; they may damage the circuitry and cause damage
which will not be covered under your warranty.
6. Servicing - Refer to your authorised Dynavector SuperStereo supplier for all servicing needs.
7. There are no user serviceable parts within the unit and removal of the chassis cover may void the warranty.
Specifications
- 9 -