Plow, 410sx operator’s manual – Ditch Witch 410SX User Manual
Page 90

410sx Operator’s Manual
Service - 89
10 Hour
Check Exhaust Clamp
Check clamp and lock screw on exhaust
extension every 10 hours to ensure that it is tight.
Replace if needed.
Check Engine Coolant Level
Check engine coolant level every 10 hours with
engine cool at plastic overflow tank. Maintain
coolant level above low level mark. If low, add
approved coolant. Clean debris from radiator
cooling fins using compressed air or pressurized
water.
Plow
Check Plow Gearbox Oil Level
Check plow vibrator oil level every 10 hours.
Check when oil is cold, with vibrator level and
skid shoes on ground. Remove plow blade and
sod cutter if necessary. Oil should be halfway up
sight glass (2). Add MPL as needed at fill (1).
NOTICE:
•
Use caution when removing radiator
pressure cap.
•
To prevent engine damage or premature
failure, use only approved coolant.
•
Do not mix coolant types.
•
See “Approved Coolant” on page 84.
IMPORTANT: Do not add oil to plow vibrator
when hot. Let plow vibrator cool before
removing fill plug.
t39om061w.eps
t39om063w.eps
1
2
t39om064w.eps