Ditch Witch 410SX - Manual (Page 54)

410sx Operator’s Manual
Transport - 53
Tow
CMW
Tow
Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is
necessary:
• Open hydrostat bypass valve.
• Do not tow for more than 200 yd (180 m).
• Tow at less than 1-2 mph (1.5-3.0 km/h).
• Unit cannot be steered as it is towed.
• Use maximum towing force of 1.5 times unit weight.
Procedure
1. Attach tow line to all available tie-down points
facing towing vehicle.
2. Check that all controls are in neutral position.
3. Open valve (shown) by turning cartridge 1/4
turn so that flat sides are horizontal.
4. Move speed/direction control in direction of
travel.
5. Disengage parking brake.
Return Unit to Normal Operation
1. Engage parking brake.
2. Block wheels.
3. Disconnect from tow point.
4. Turn tow valve cartridge to original position.
t39om055w.eps