Ditch Witch 410SX - Manual (Page 76)

410sx Operator’s Manual
Systems and Equipment - 75
Optional Equipment
Plow Blades
Blade Maintenance
• Keep cable guide wing bolts tight. Loose cable guide bolts will break due to plow vibration.
• Keep plow feed tube free of rock and debris so that material pulls freely though tube.
• Use a speed blade only for straight or gently curving installations. Do not use speed blades for
installations that require sharp turns.
• Use the plow blade most appropriate for the type of material being installed. Contact your Ditch Witch
dealer for information about the most effective blade for your jobsite conditions.
Blade Types
Type Description
feed blade used to “stitch” flexible material into the ground as it is fed through a chute or
tube located at the back of the blade
speed blade a thin feed-type blade used for high speed, straight plowing
pull blade used to pull rigid or semi-rigid material into the ground through a tunnel made
by a “bullet” at the bottom of the blade; a pulling grip is used to attach the material
to the blade