Ditch Witch 410SX - Manual (Page 83)

Service - 82
410sx Operator’s Manual
Service Precautions
Service Precautions
Cleaning Precaution
Welding Precaution
Read operator’s manual. Know how to use all controls before operating
machine. When you see this sign on the machine or in the manual, read it and use
caution. Your safety is at stake.
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
• Allow equipment to cool before performing service.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
• Before servicing equipment, lower unstowed attachments to ground.
NOTICE: When cleaning equipment, do not spray electrical components with water.
NOTICE: Welding can damage electronics.
• Disconnect negative cable on battery before welding to prevent damage to battery.
• Welding currents can damage electronic components. Always disconnect the ECU ground
connection from the frame, harness connections to the ECU, and other electronic components prior
to welding on machine or attachments. Connect welder ground close to welding point and make sure
no electronic components are in the ground path.