Remove debris, Procedure, Fx25 operator’s manual – Ditch Witch FX25 User Manual
Page 49
Vacuum and Pothole - 48
FX25 Operator’s Manual
Remove Debris
CMW
Remove Debris
Procedure
1.
Position vacuum hose in area to be excavated.
2.
Start engine.
3.
Open inlet valve.
4.
Use sight glasses to monitor debris level in tank. Vacuum will shut off when tank is full but always heed
trailer and tank lifting capacities as indicated on page 45. Engine will remain running.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
Vacuum will suffocate. Maintain distance between face and
vacuum inlets.
Fire or explosion possible. Do not vacuum flammable or
combustible substances.
Incorrect procedures could result in death, injury, or property
damage. Learn to use equipment correctly.
To help avoid injury: Do not excavate hazardous or toxic materials. Unit is designed to excavate
only soil cuttings, drilling fluids, and other non-toxic waste.
NOTICE: Avoid idling engine with inlet valve closed.
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)