Connect hoses, Start unit, E 44) – Ditch Witch FX20 User Manual
Page 45: Fx20 operator’s manual
Vacuum and Pothole - 44
FX20 Operator’s Manual
Connect Hoses
CMW
Connect Hoses
1.
Remove vacuum hoses from storage.
2.
If potholing, remove potholing tool from storage.
3.
Connect hoses. Secure all locking clamps.
4.
Ensure inlet and drain valves are closed.
5.
If potholing, connect water pressure hose (shown).
Start Unit
1.
Insert key.
2.
Choke engine if necessary. See page 20 for more information.
3.
Turn key clockwise. See page 21 for more information.
4.
Run engine at low throttle for 5 minutes.
EMERGENCY SHUTDOWN: Turn ignition switch to STOP.
IMPORTANT: Engine will not run at low idle when inlet valve is closed.
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)