Ditch Witch JT2020 - Manual (Page 58)

JT2020 Mach 1 Operator’s Manual
Controls - 57
Ditch Witch Electronics 750/752 Display
CMW
2. On/Off button
To turn on, press.
To turn off, press again.
3. Channel select button
To display current channel,
press and release.
To switch channels, press
and hold.
Second function:
To start a new job, press with
Recall button.
“Init” and job number will be
displayed.
Unit defaults to last channel used
each time unit is turned on.
IMPORTANT: Make sure display and
tracker are set to the same channel.
4. Roll stop button
This feature is not yet
available.
5. Recall button
To see data about pipe, press
and release.
Second function:
To access second functions,
press with other buttons.
Internal: shows data about previous
pipe.
External: shows data about next pipe.
Item Description Notes