Ditch Witch JT2020 User Manual

Page 196

JT2020 Mach 1 Operator’s Manual

Specifications - 195

CMW

Specifications are called out according to SAE recommended practices where indicated. Specifications are general and subject
tochange without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options,
delivered equipment may not necessarily match that shown.

Maximum drilling fluid pressure (per SAE J2022)

1500 psi

103 bar

Fluid Capacities

U.S.

Metric

Fuel tank *

30 gal

114 L

Hydraulic reservoir

19 gal

72 L

Engine oil, including filter

8.5 qt

8 L

Cooling system

4.4 gal

17 L

* Under normal operating conditions, a full tank of fuel will last 10 hours.

Battery

SAE reserve capacity 195 min, 12V, negative ground, SAE cold crank @ 0°F (-18°C), 950 amps.

Vibration Level

Vibration transmitted to the operator’s hand and whole body during normal operation does not exceed

2.5 m/s

and 0.5 m/s

respectively.

Operator seat complies with ISO 7096.

Noise Levels

Operator ear sound pressure level is 86 dBA sound pressure per ISO 6394

Exterior sound power level is 103 dBA per ISO 6393

Drilling Fluid System (Onboard)

U.S.

Metric