Ditch Witch JT2020 User Manual
Page 172
JT2020 Mach 1 Operator’s
Manual
Service - 171
Startup/10 Hour
CMW
Check Pipe Lube Applicator
Check pipe lube applicator before startup and every 10 hours of operation. Replace if damaged or badly
worn.
Check Pipe Auto Lubricator Spray Nozzle
Check pipe auto lubricator spray nozzle before startup and every 10 hours of operation. Ensure that nozzle
is free of obstructions and operates properly. Clean as needed.
To clean:
1.
Rotate handle to the upward, or cleanout, position (A).
2.
Operate pump until obstruction is flushed.
3.
Rotate handle to the downward, or spray, position (B).
4.
Clean nozzle guard. If necessary, pull handle/nozzle insert out of housing to clean with fine wire or
solvent.
NOTICE: Ditch Witch tool joint compound is specially formulated to work with Ditch Witch pipe
lubrication system. Use of other tool joint compounds will clog system. See “Recommended Lubricants/
Service Key” on page 163 for more information.
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT20 (195 pages)
- JT1220 (201 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)