Corinex AV200 - Manual (Page 31)

29
Adapter Configuration
Corinex AV200 Powerline Ethernet Wall Mount
6. Click “OK” to start the process. The progress is shown every 30 seconds.
7. The adapter will first download the file and then calculate the CRC.
8. If the CRC is correct, the Hardware Reset button will be highlighted. The
adapter must be restarted for the new firmware to be activated.
3.4.12 Configuring Video Applications
On a network where real-time traffic must co-exist with massive data transfers, the
service classifier must be used to prioritize the more sensitive traffic above the other
types of traffic.
As an example, consider the network shown below :
2. Save the firmware file in the folder specified in “Current Directory” or click
“Browse” and find where the file is saved.
3. Open the Web browser and enter the IP of the adapter to be upgraded.
4. When the page comes up, click on Change configuration.
5. In the Firmware Update window, select TFTP and enter the IP of the TFTP
server and the name of the file, as shown in the following picture :
Corinex AV200 Powerline Wall Mount
Corinex AV200 Powerline Wall Mount
Corinex AV200 Powerline Wall Mount
Home Electrical Wiring
HDTV
Internet
Router or
Cable / DSL Broadband Modem
Set-Top Box
Computer/ Media Center PC
AV200 Powerline Wall Mount
AP VPI Power
SYNC/RST
STANDBY
AV200 Powerline Wall Mount
AP VPI
Power
SYNC/RST
STANDBY
AV200 Powerline
Wall Mount
AP VPI Power
SYNC/RST
STANDBY