Cino PL680BT HC - Manual (Page 90)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
82
PROGRAM
Operation Control
(All Series)
♦ Batch Scanning Setting ♦ F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Batch Scanning Link Control SS
SS Radio disable
Radio enable 0
1
Stored Data Transmission SS
SS
SS All
On cradle
Scan barcode 0
1
2
Delete Stored Data after
Transmission
SS
SS Disable
Enable 0
1
The Batch Scanning Link Control is a pre-defined radio option to control the radio-on or radio-off status under batch scanning operation. Please note that if the radio
disable is activated, the radio link will be disconnected once you enter batching scanning. The radio link will be resumed when you transmit the stored data or exit batch
scanning.
The Stored Data Transmission is a pre-defined approach when you want to transmit the scanned data under batch scanning operation. You can transmit the scanned data
by placing the scanner onto the cradle or scanning “Transmit Stored Data” command, or by either one of both methods.
In batching scanning, the default setting of Delete Stored Data after Transmission is disable. The scanner will keep all stored data after transmission until you scan the
“Clear All Stored Data” command. You are also able to delete all stored data after transmission automatically by enabling this function.