Cino PL680BT HC - Manual (Page 85)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
77
PROGRAM
Operation Control
(L & PL Series)
♦ Smart stand Power Off Timeout, Laser Aiming Control,
LED Illumination Control
♦
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
SmartStand Power Off Timeout SS
SS
SS 3 mins
5 mins
10 mins
Only available for FuuzzyScan Laser model 0
1
2
Laser Aiming Control SS
SS Disable
Enable
Only available for L series laser imaging scanner. 0
1
LED Illumination Control SS
SS Always on
Intelligent Mode
Only available for L& PL Series. 0
1
LED Illumination Delay SS
SS
SS
SS
SS 100 ms
150 ms
200 ms
250 ms
300 ms
Only available for L & PL Series.
0
1
2
3
4
The SmartStand Power Off Timeout is a pre-defined duration for scanner’s light source on time when the scanner is placed on SmartStand. While the scanner is placed
on SmartStand, the scanner’s will be switched from hand-held scanning to presentation scanning and the light source will be forced on automatically. The light source will
be off when the pre-defined duration is up.
Laser Aiming Control: You can disable or enable laser aiming line when you scan PDF barcode
LED Illumination Control : When you enable “always on“, the LED illumination will be always on when you press the trigger. When you enable “intelligent mode”, the
scanner will emit the laser aiming line first, the LED illumination will be turned on after the preset LED illumination delay. Intelligent mode is recommended to be used in
regular ambient light environment.