Cino PL680BT HC - Manual (Page 81)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
73
PROGRAM
Operation Control
(All Series)
♦ Delay Setting ♦ F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Reread Delay
(Double Scan Verification)
SS
SS
SS
SS
SS
SS Disable
Immediate time out
Short time out
Medium time out
Long time out
Force verification 0
1
2
3
4
5
Good Read Delay SS
SS
SS
SS
SS
SS
SS None
200 msec.
500 msec.
1 sec.
1.5 sec.
2 sec.
3 sec. 0
1
2
3
4
5
6
HID Mode Transmit Delay SS
MS
None
1-250 msec.
Scan 3 digits from the option code chart in Appendix, then FuzzyScan will terminate
this selection automatically. FIN
(3 digits)
The Reread Delay (Double Scan Verification) is designed to inhibit FuzzyScan from reading the same bar code label twice in pre-defined short duration. Force Verification
will not allow reading of the same bar code twice.
This Good Read Delay is the minimum amount of time before the scanner can read another bar code.