Cino PL680BT HC - Manual (Page 29)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
21
Cycling scan selection Dual level selection
Enter programming mode.
Select one of desired
programming families.
Cycling select one or
several option codes of
desired parameters as
“Single” or “Multiple”
scans selection.
Finish cycling selection.
(If necessary)
Want to select another
programming family?
Exit programming mode.
Scan
“PROGRAM”
Scan
One of Family Codes
Scan
One of Option Codes
Repeat
Selection
Scan
“END”
No
Yes
Scan “FIN”
Enter programming mode.
Select one of desired
programming families.
Select several option codes
of desired parameters.
1. Select one or several
option codes of desired
parameters.
2. If it’s necessary, scan
“FIN” to terminate
option code selection.
Want to select another
programming family?
Exit programming mode.
Scan
One of Family Codes
(1st) Scan
Several Option Codes
Yes
Scan
“PROGRAM”
Repeat
Selection
Scan
“END”
No
(2nd) Scan One or
Several Option Codes