Austin Hughes IPM-03 - Manual (Page 50)

www.austin-hughes.com UM-IPM-03-Q214V3 P.45
Meter for W series Intelligent kWh PDU
1. What is feature of the Wi Outlet kWh Monitored / W kWh Monitored PDU?
The W kWh Monitored PDU offers simple & highly reliable power distribution to multiple equipments, and built-in
a 1.8” LCD meter indicates the total energy consumption of equipment connected to the PDU. The digital am-
pere meter has an interface which can connect to an IP dongle to the ethernet network, which allows managers
to real-time remote monitor the PDU load thru the InfraPower manager (IPM-03).
2. What is feature of the WSi Outlet kWh Switched / WS kWh Switched PDU?
The WS kWh Switched PDUs offers the same features as W kWh Monitored PDUs, with an addition remote con-
trol power capability to individual PDU outlets. The remote outlet power control allows power on/off functionality
for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets.
3. Can the WSi Outlet kWh Switched / Wi Outlet kWh Monitored / WS kWh Switched / W kWh Moni-
tored PDUs cascade together?
Yes, the WS kWh Switched & W kWh Monitored model PDUs can connect together as a cascade chain.
4. If one of the cascaded WSi Outlet kWh Switched / Wi Outlet kWh Monitored / WS kWh Switched / W
kWh Monitored PDU loses power, will it affect other PDUs in the same chain?
No, the other cascaded WS kWh Switched & W kWh Monitored PDUs in upper & lower level will not be af-
fected.
5. What is the maximum cabling distance between two cascaded PDUs?
Up to 20 meter (66 feet) of CAT. 5 / 6 cable.
6. What is the maximum cascade level of the WSi Outlet kWh Switched / Wi Outlet kWh Monitored /
WS kWh Switched / W kWh Monitored PDU in a chain?
16 levels
Others
1. What is the default outlet status of WSi Outlet kWh Switched / WS Switched PDU ?
The default outlet status is ON.
2. Will the PDU settings remain unchanged after power OFF?
Yes, the settings will remain unchanged such as PDU Name, Location, Alarm amp., Low alert amp., Outlet
Name......
3. Does the InfraPower PDU has the overpower protection?
Yes, the PDU provides the resettable fuse or optional circuit breaker for the overpower protection.
4. What is the standard inlet cable length of InfraPower?
3 meter ( 9.9 feet ).
5. Where can I fi nd the Catalogue / User manual /Model list / Wire diagram of InfraPower
PDUs?
Please visit the www.austin-hughes.com
6. How can we get a further support?
Please send the email to
[email protected] or [email protected]
Part VII. FAQ