Austin Hughes IPM-03 - Manual (Page 32)

www.austin-hughes.com UM-IPM-03-Q214V3 P.27
In < Outlet setting >,
- Change PDU’s outlet name
- Change “ Power up sequence delay ” of PDU’s outlet
( WS kWh switched and WSi Outlet kWh Switched PDU only )
- Change “ Alarm amp. ” , “ Rising alert amp. “ & “ Low alert amp. ” of PDU’s outlet
( Wi kWh Monitored & WSi Outlet kWh Switched PDU only )
Click “ Apply ” to fi nish the above settings
- Click “ Reset ” to reset peak amp. or kWh of PDU’s outlet
( Wi kWh Monitored & WSi Outlet kWh Switched PDU only )
Part IV. Software Usage & Operation