Part iii. system setup & remote access, 1 > system setup – Austin Hughes IPM-03 User Manual

Page 23

www.austin-hughes.com

UM-IPM-03-Q214V3

P.18

Part III. System Setup & Remote Access

Step 1. Open Internet Explorer ( I.E. ), version 8.0 or above

Step 2. Enter the URL of management PC into the address bar

( If fail to access, please ask MIS to check if the port for web server is enable.

Default port : 80 )

e.g. http://192.168.0.1/IPM-03/

Step 3. Enter “ User name “ . Default is “ admin “

Enter “ Password “ . Default is “ 00000000 “

Users can follow below step 1 - 3 to access the management PC and InfraPower Manager IPM-03

Then users should go to < User >, < Setup >, < Alarm >, < General > & < Backup > for initial

system setup

Only Administrator is authorised to access < User >, < Setup >, < Alarm >, < General > &

< Backup >

Router or hub

Management PC

InfraPower Manager IPM-03

< 3.1 > System setup