Unpacking package contents, Power on, 1 ) vertical w / wi / ws / wsi pdu x 1 – Austin Hughes IPM-03 User Manual
Page 3: 2 ) rackmount w / wi / ws / wsi pdu x 1 or
www.austin-hughes.com
UM-IPM-03-Q214V3
The equipment comes with the standard parts shown on the package contents. Check and make sure they are included and in good
condition. If anything is missing, or damage, contact the supplier immediately.
Unpacking
Package contents
( 1 ) Vertical W / Wi / WS / WSi PDU x 1
- VMS mounting screw, set of 2 or 3
- VMB mounting bracket set
2 - 3 sets
+
M4
M4 x 2
M6 x 2
M6 nut x 2
PEG
M4
M4
M6
M6
M6 nut
M6 nut
Bracket x 2
( 2 ) Rackmount W / Wi / WS / WSi PDU x 1
OR
Power ON
■
Connect the PDU into an appropriately rated receptacle
■
When the PDU is power on, the LED display will light up. That means all outlets are activated
■
Keep the equipments in the power off position until it is plugged into the PDU
Don’t exceed the outlet, branch or phase limitations
All electrical power and power control wiring must be installed by a qualifi ed electrician and comply with local
and national regulations.
LINK
OU
T
TH 1
TH 2
65
37.
5
45
22.
3
15.
9
3.48
3.49
15.
8
31.
7
6.97
LINK
OU
T
TH 1
TH 2
65
37.
5
45
22.
3
15.
9
3.48
3.49
15.
8
31.
7
6.97