Austin Hughes IPM-03 - Manual (Page 34)

www.austin-hughes.com UM-IPM-03-Q214V3 P.29
In < TH setting >,
- “ Activate ” or “ Deactivate ” Temp. & Humid sensors
- Change “ Location ” , “ Rising alert Setting “ & “Alarm Setting ” of Temp. & Humid sensors
- Click “ Apply ” to fi nish the above settings
The default TH setting is Deactivate .
- When install T or TH sensor, please tick Activate . Otherwise, no readings display.
- DON’T activate T or TH sensor if no sensor installed.
Part IV. Software Usage & Operation