beautypg.com

Mike, Specifications – American Energy Systems MagnuM 7500 User Manual

Page 3

background image

3

DEAR VALUED MAGNUM 7500 OWNER,

We appreciate your decision to help preserve our precious environment by purchasing the Magnum 6500
or the 7500 Corn/Wood Pellet Furnace.
With everyone working together, we can have clean air and
renewable heat for our homes. Making a decision today to conserve energy will result in lower energy
costs tomorrow along with conserving our precious natural resources.

Please read this Owners Manual carefully before using this appliance and if you have any questions
contact your local Magnum reseller. We appreciate your business and wish you many warm days and
nights with your new Magnum 6500/7500 Corn/Wood Pellet Furnace.

Sincerely,

Mike

Mike Haefner, President
American Energy Systems, Inc.

P.S. You are very important to the success of our business and your referral of our products is very much
appreciated. Many of our Resellers have referral rewards available and I encourage you to ask your local
dealer how to get involved in helping make our country energy self-sufficient. GOOD LUCK !




American Energy Systems, Inc., manufacturer of the Magnum 6500/7500 Corn/Wood Pellet Appliances, reserves
the right to alter its products, their specifications and/or price without notice.

Safety tested by Warnock Hersey to UL 391-99, CAN/CSA-B366.1-M91,


















*BTU input can vary from 10-60 percent, depending on the brand of fuel, size of fuel, quality of fuel and moisture content. Improper

installation, venting configuration, combustion air configuration and maintenance practices will seriously decrease the heating ability of

this appliance. Consult your authorized Magnum reseller for information to get the best results out of your Magnum appliance.

Heat Input*

7500 = up to 78,000 BTU/hr with corn

6500 = up to 78,000 BTU/hr with corn

Fuel Storage Capacity

180-210 Lbs.

Width 26”
Height with Pedestal

47 ½”

Depth (includes ash lip)

36”

Shipping Weight

480 pounds

Electrical Requirements

115 volts – 60 cycle – 10 amp Circuit

Flue Size (rear exit)

3” or 4” Type L Vent

Warm Air Outlet

12” Round or 14” x 14” rectangular

Room Air Blower

1240 CFM furnace blower

Cold Air Return

14” x 24”

Filter Size

16 x 25”

Overall unit efficiency

As high as 87%

Total Amp. Draw

Full load = 9 amp.

SPECIFICATIONS

This manual is related to the following products: