Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 9)

Step 13.
Insert 6pcs Rubber Tension Damper Balls into the
holes of Top Mounting Frame. Step 14.
Complete assembly.
Step 15.
Install the Top Mounting Frame onto the bottom side
of Phantom using 2pcs Silver Philip Screws.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 16.
Remove the cover layer of the foam tap on the BL
Gimbal Controller.
Page 9 of 19