Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 12)

5. Assembly Steps – IMU Mounting
Step 1.
Prepare the IMU Unit. Step 2.
Connect one end of the IMU Cable onto the IMU port
of the Gimbal Controller Board.
Step 3.
Stick the IMU Unit onto the Upper Camera cover
using double-sided foam tape. Check the double faced
adhesive tape regularly to ensure that the IMU is
securely positioned.
(Ensure the orientation of the
IMU is installed correctly.)
Step 4.
Connect the other end of the IMU Cable into the IMU
unit.
Page 12 of 19