Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 10)

Step 17.
Stick the BL Gimbal Controller board on the Top
Mounting Frame and secure it with 4pcs Nylon M3
Nuts. (Tighten the Nylon Nuts completely.) Step 18.
Install the Gopro 3 camera onto the Upper Camera
cover using the Side Camera Cover and secure it with
2pcs Silver Hex Cap Screw M2.5x6mm.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 19.
Complete assembly. Step 20.
Connect the gimbal mount with 6pcs Rubber Tension
Damper Balls.
Page 10 of 19