Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 16)

7. Assembly Steps – Setup Manual Tilting on NAZA
Step 1.
Turn on the Transmitter and then power on the
Phantom. Then connect Phantom to the computer with
DJI Assistance Software. (For more details, please
refer to the manual of your Phantom.) Step 2.
You can take this Gain values as reference if needed.
(You may need to adjust these values according to
your own situation.)
The value of Pitch and Roll gain
must be lower than 110 so that the gimbal will work
with minimum vibration.
Step 3.
Setup the Gimbal function of your Phantom as shown
above as to control the Tilt axis of GP-35 Gimbal with
original Phantom Transmitter. Step 4.
This is for reference only.
(You can adjust these values
according to your own situation.)
Page 16 of 19