Troubleshooting, End of manual – Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 User Manual

Page 19

10. Troubleshooting

Q1: Why does the gimbal not stabilize the camera?
A: Please refer to installation and make sure the IMU Unit is installed at right orientation and the motors
are connected to the right pins.

Q2: Why is the gimbal shaking?
A: Usually it is caused be wrong IMU facing, please make sure it is facing down. Refer to IMU Mounting
section.

Q3. Why is the captured video shaking?
A: Please ensure your Aircraft is well turned with minimum vibration before mounting the Gimbal. Sometimes
you may need to balance the props for your Aircraft too.

Q4: Do I need to upgrade to latest version of firmware or adjust any parameters?
A: It is not necessary to upgrade the firmware or adjust any parameters unless further instruction is given. The
Brushless Gimbal Controller is well tuned to plug-n-play with GoPro 3 Camera on Phantom to give the best
performance.

Q5: Where can I get more help for this product?
A: Please contact our distributors/ dealers for warranty and customer service.