Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 6)

4. Assembly Steps – Mechanism Parts
Step 1.
Recognize the oriantation for the BL Gimbal Motor. Step 2.
Install a Motor Mount onto the Front Side of BL
Gimbal Motor using M2.5x6mm Hex Cap Screws
which is included with the motor. This is the Tilt Axis.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 3.
Install the Upper Camera cover onto the Motor Mount
using Silver Hex Cap Screw M2.5x6mm.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Sep 4.
Complete assembly.
Page 6 of 19