Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 7)

Step 5.
Install the Front Arm onto the Back Side of BL
Gimbal Motor using M2.5x6mm Hex Cap Screws
which is included with the motor.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 6.
Complete assembly.
Step 7.
Install the Front Arm onto the Front Side of BL
Gimbal Motor using M2.5x6mm Hex Cap Screws
which is included with the motor.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 8.
Complete assemblly.
Page 7 of 19