Alwarerc Senrigan GP-35 Brushless Gimbal For DJI Phantom 1/2 - Manual (Page 8)

Step 9.
Install the Lower Damper Plate onto the Rear Arm
using Black Philip Screws. Pay attention to the
installation direction of the Lower Damper Plate.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 10.
Complete assembly.
Step 11.
Insert the cable of the Tilt Motor into the hole of the
Roll motor. Step 12.
Close view for the wiring of the Tilt motor.
Page 8 of 19