ADLINK CoreModule 720 - Manual (Page 60)

Appendix B Video Adapter Board
54 Reference Manual CoreModule 720
Video Adapter Board Header Signals
The following table defines the pin signals of the non-standard VGA header on the video adapter board. This
appendix does not define the industry-standard SDVO connector on the board. See Table 2-2 on page 11 for
more SDVO connector information.
Table B-1 lists the signals and their descriptions for the J2 VGA interface, which provides a shrouded,
12-pin right-angle header with odd/even (1, 2) pin sequence, and 0.079" (2mm) pitch (Adam Tech 2BRH).
Note: The shaded table cells denote power or ground.
Table B-1. VGA Interface Pin Signals (J2)
Pin # Signal Description
1 RED Red – This is the Red analog output signal to the CRT.
2 GND Ground (Red Return)
3 GREEN Green – This is the Green analog output signal to the CRT.
4 GND Ground (Green Return)
5 BLUE Blue – This is the Blue analog output signal to the CRT.
6 GND Ground (Blue Return)
7 HSYNC Horizontal Sync – This signal is used for the digital horizontal sync output
to the CRT.
8 GND Ground
9 VSYNC Vertical Sync – This signal is used for the digital vertical sync output to
the CRT.
10 PWR Power – Provided through fuse (F1) to +5 volts +/- 5%. F1 is next to J3
connector on board.
11 SDA DDC (Display Data Channel) Data
12 SCL DDC (Display Data Channel) Clock