ADLINK CoreModule 720 - Manual (Page 52)

Chapter 4 BIOS Setup
46 Reference Manual CoreModule 720
• CSM16 Module Version XX.XX
 Gate A20 Active [Upon Request; Always]
 Option ROM Messages [Force BIOS; Keep Current]
 WatchDog Timer [0]
 Interrupt 19 Capture [Disabled; Enabled]
• Boot Option Priorities
 Boot Option #1 [P1-GLS85LS1032A CS 32GBN A101C0; Built -in EFI Shell; Disabled]
 Boot Option #2 [P1-GLS85LS1032A CS 32GBN A101C0; Built-in EFI Shell; Disabled]
 Hard Drive BBS Priorities
• Boot Option #1 [P1-GLS85LS1032A CS 32GBN A101C0; Disabled]
Security BIOS Setup Screen
Figure 4-5. Security BIOS Setup Screen
• Password Description
 Administrator Password [Create New Password]
 User Password [Create New Password]
Aptio Setup Utility - Copyright (C) 20XX American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.
CM720_BIOS_Security_a
Main Advanced Chipset Boot Security Save & Exit
Administrator Password
User Password
[Setting Description]
: Select Screen
: Select Item
+/- : Change Opt.
F1 : General Help
Enter : Select
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC: Exit