Table 2-2, Header, connector, and socket definitions, Module header and connector descriptions – ADLINK CoreModule 720 User Manual
Page 17
Chapter 2
Product Overview
CoreModule 720
Reference Manual
11
Header, Connector, and Socket Definitions
describes the headers, connectors, and socket of the CoreModule 720 shown in
.
Table 2-2. Module Header and Connector Descriptions
Header #
Board
Access
Description
J1 – LPC Debug
Top
10-pin, 0.050" (1.27mm) female debug port header for issues such
as Port 80 POST errors (NELTRON, 2200SB-10G-SM-23-CR)
J3 – GPIO
Top
10-pin, 0.079" (2mm) header for General Purpose IO signals
(TEKA, HM205CB1N-191-00)
J4 – CAN
Top
4-pin, 0.079" (2mm) header for transmitting and receiving
Controller Area Network signals
(JIH VEI, 21N12050-04S10B-01G-4/2.8-G)
J5 – SD Memory Socket Bottom
(See
9-pin standard socket for Security Digital Memory cards
(TYCO, 1939115-1)
J6 – I
2
C
Top
5-pin, 0.079" (2mm) header for I
2
C bus (SAMTEC, TMM-105-
03-LM-S)
J7 – SATA0
Top
7-pin, 0.050" (1.27mm) standard connector for SATA devices
(WIN WIN, WATM-07DBN4B3B8UW)
J8 – Ethernet - Gigabit
Top
10-pin, 0.079" (2mm) shrouded header for Gigabit Ethernet port
(HIROSE, DF11-10DP-2DSA)
J9 – LED Ethernet -
Gigabit
Top
4-pin, 0.049" (1.25mm) shrouded header for Ethernet LED signals
(SMP, W125-0410-310-Z)
J10 – Serial 1
Top
10-pin, 0.079" (2mm) shrouded header for the COM0 signals
(HIROSE, DF11-10DP-2DSA)
J11 – Serial 2
Top
10-pin, 0.079" (2mm) shrouded header for the COM1, 2, and 3
signals (HIROSE, DF11-10DP-2DSA)
J12 – USB 0-1
Top
10-pin, 0.079" (2mm) shrouded header for USB0 and USB1
signals (HIROSE, DF11-10DP-2DSA)
J13 – USB 4-5
Top
10-pin, 0.079" (2mm) shrouded header for USB4 and USB5
signals (HIROSE, DF11-10DP-2DSA)
J14 – USB 2-3
Top
10-pin, 0.079" (2mm) shrouded header for USB2 and USB3
signals (HIROSE, DF11-10DP-2DSA)
J15 – SDVO
Top
30-pin, 0.020" (0.5mm) flip-lock, bottom-contact FPC connector
for single-channel SDVO interface (HIROSE, FH12-30S-0.5SH)
J17 – PC/104-Plus
Top/Bottom
120-pin, 0.079" (2mm) standard connector for PC/104-Plus
signals (EPT, 264-60303-12)
J18 – PC/104
Top/Bottom
104-pin, 0.100" (2.54mm) standard connector for PC/104 signals
(COMM CON, 51923G)
J19 – Power
Top
10-pin, 0.100" (2.54mm) right-angle, shrouded header for external
power connection (FCI, 78207-210HLF)
J20 – Battery
Top
2-pin, 0.049" (1.25mm) shrouded header for power from external
battery (SMP, W125-0210-310-Z)
J21 – Fan
Top
3-pin, 0.079" (2mm) shrouded header for System Fan signals
(NELTRON, 2417SJ-03)