ADLINK ASD8P-MT1 Series - Manual (Page 40)

Page 40 of 43 ASD8P-MT1 Specification
6 SATA Command Sets
6.1 SATA Command
The SATA 3. 0 Specification is a super set of the ATA/ATAPI-8 specification with regard to
supported commands. The ASD8P-MT1 PCIe Gen2 x 2 Lane SSD also supports the following
features which are unique to the SATA 3. 0 Specification.
Software Settings Preservation
The ASD8P-MT1 PCIe Gen2 x 2 Lane SSD supports the SET FEATURES parameter to
enable/disable the preservation of software settings.
Native Command Queuing
The ASD8P-MT1 PCIe Gen2 x 2 Lane SSD supports the Native Command Queuing (NCQ)
command set, which includes.
- READ FPDMA QUEUED
- WRITE FPDMA QUEUED
Note: with a maximum queue depth equal to 32