ADLINK aTCA-N700 - Manual (Page 34)

aTCA-RN720 User's Guide
34
6.4 Port Mapping
The front blade (aTCA-N700) service port numbers, Zone 3 signals and its corresponding
retimers are mapped as shown in Table 6-1. A different front blade may have different port
numbers.
Table 6-1 Service Port Mapping
Zone 3
Pin Pos
Zone 3
Signal name
aTCA-N700
Switch Port
(SerDes lane#)
Retimer #
Port Number
(SFP+/SFP)
P14 (57)
P14 (58)
P14 (59)
Conn P3:
A1~H1,
A2~H2
RTM_SFP_RX_P/N [0:3],
RTM_SFP_TX_P/N [0:3]
P14 (60)
GN2405A#0
GN2405A#1 P1(QSFP)@Top
location
P13 (53)
P13 (54)
P13 (55)
Conn P3:
A3~H3,
A4~H4
RTM_SFP_RX_P/N [4:7],
RTM_SFP_TX_P/N [4:7]
P13 (56)
GN2405A#2
GN2405A#3
P2(QSFP)
P12 (49) P3 (SFP+)
P12 (50) P4 (SFP+)
P12 (51) P5 (SFP+)
Conn P3:
A5~H5,
A6~H6
RTM_SFP_RX_P/N [8:11],
RTM_SFP_TX_P/N [8:11]
P12 (52)
GN2405A#4
GN2405A#5
P6 (SFP+)