ADLINK PXES-2590 - Manual (Page 43)

Monitoring/Control Functions 33
PXES-2590
4 Monitoring/Control Functions
The monitoring/control function library can be used to create a
customized program for monitoring and controlling the PXES-
2590. The smbus interface on the system controller provides
access to system monitoring functions, including:
X
Read backplane/chassis data such as power/temperature/
fan speed
X Set thresholds for power/temperature/fan
X Read firmware version
X Set fan speeds
The following abbreviations are used in this chapter:
4.1 SMBus API
The PXES-2590 SMBus slave address of the system monitoring
function is 0xC6h.
4.2 Function Overview
The following table shows all commands to access monitored data
MA Master Address
MCU Microcontroller on backplane.
SA Slave Address (= 0x32)
SC System controller located in slot 1
SMB System Management Bus
Command Function Access
0x02 Read Alarm Status R
0x04 Read 5V Voltage R
0x06 Read 3.3V Voltage R
0x08 Read +12V Voltage R
0x0A Read -12V Voltage R
0x0C Read 5Vsb Voltage R
0x10 Read Temperature 1 R
0x12 Read Temperature 2 R
0x14 Read Temperature 3 R