ADLINK ACL-8112 Series User Manual
Page 71

C Language Library • 63
7.8 _8112_AD_Set_Channel
Description
This function is used to set the AD channel by means of writing data to
the multiplexer scan channel register. There are 16 single-ended A/D
channels for the ACL-8112, so the channel number must be set
between 0 and 15. The initial state is channel 0, which is the default
setting for the ACL-8112.
Syntax
int _8112_AD_Set_Channel( int ad_ch_no )
int _8112pg_AD_Set_Channel( int ad_ch_no )
Argument:
ad_ch_no:
Number of channels to perform AD
conversions:
for single-ended mode: 0-15
for differential mode: 0-7
Return Code:
ERR_NoError
ERR_BoardNoInit
ERR_InvalidADChannel
Example:
#include “8112.h”
main()
{
_8112_Initial( CARD_1, A8112B_DG, 0x220 );
/* Assume NoError when Initialize ACL-8112 */
_8112_AD_Input_Mode( DIFFERENTIAL) ;
/* set analog input mode as “differential” mode */
_8112_AD_Set_Channel( 3 );
printf( "AD channel 3 is now selected.\n" );
...
/* the following A/D's operation is based on channel
3 */
}