ADLINK ACL-8112 Series - Manual (Page 17)

Installation • 9
2
Installation
This chapter describes how to install the ACL-8112 series products. Please
use the following steps to install the product.
• Check what you have (section 2.1)
• Unpacking (section 2.2)
• Check the PCB and jumper location(section 2.3)
• Install the hardware and setup the jumpers and switches (sections 2.4
to 2.12)
• Cabling with external devices (section 2.13)
2.1 What You Have
In addition to this User's Manual, the package includes the following items:
• ACL-8112 Enhanced Multi-function Data Acquisition Card
• ADLINK CD
If any of these items are missing or damaged, contact ADLINK or the dealer
from whom the product was purchased. Save the shipping materials and
carton for future shipping or storage.
Note: The utilities and libraries in the CD-ROM only support the ACL-8112
series under DOS environment. If you need to develop applications
under Windows 3.1, Windows 95 or Windows NT, please contact our
dealer for purchasing software development kit ACLS-DLL2.