ADLINK ACL-8112 Series - Manual (Page 11)

Introduction • 3
1.1 Features
The ACL-8112 series Enhanced Multi-function Data Acquisition Card
provides the following advanced features:
• AT-Bus
• 16 single-ended or eight differential analog input channels for ACL-
8112DG/HG, 16 single-ended for ACL-8112PG
• Bipolar or unipolar input signals for ACL-8112DG/HG, bipolar for ACL-
8112PG
• Programmable gain
• High gain for ACL-8112HG:( x0.5, x1, x5, x10, x50, x100, x500,
x1,000)
• Normal gain for ACL-8112DG (x0.5, x1, x2, x4, x8)
• Five Levels programmable gain for ACL-8112PG (x1, x2, x4, x8, x16),
x0.5 gain can be set by jumper
• On-chip sample & hold
• Two 12-bit monolithic multiplying analog output channels
• 16 digital output channels
• 16 digital input channels
• Three programmable 16-bit down counters
• Programmable sampling rate of up to 100KHz
• Three A/D trigger modes: software trigger, programmable pacer
trigger, and external pulse trigger
• AT interrupt IRQ capability: nine IRQ levels (IRQ3~IRQ15) are jumper
selectable
• Integral DC-to-DC converter for stable analog power source
• 37-pin D-type connector
• Compact size: half-size PCB